# connections for gladevcp panel, example embed command:
# EMBED_TAB_COMMAND=halcmd loadusr -Wn gladevcp8 gladevcp -c gladevcp8  -x {XID} ./moveoff_gladevcp_8.ui
# note the expected name prefix is 'gladevcp8' (specified with -Wn arg and -c arg)

# connect to signals created by moveoff_external.hal
# to inputs from gladevcp panel:
net external_enable       <= gladevcp8.enable-offset
net external_offset_0     <= gladevcp8.x-offset-f
net external_offset_1     <= gladevcp8.y-offset-f
net external_offset_2     <= gladevcp8.z-offset-f
net external_backtrack_en <= gladevcp8.enable-backtrack

# connect signal provided by moveoff_gui to gladevcp led:
net mvoff_gui:apply_offsets gladevcp8.led-apply

# connect for gladevcp status items:
net led-offset-applied         mv.offset-applied        => gladevcp8.led-active
net led-waypoint-limeit        mv.waypoint-limit        => gladevcp8.led-waypoint-limit
net show_waypoint-percent-used mv.waypoint-percent-used => gladevcp8.waypoint-percent-used

# connect for gladevcp display of current offsets:
net current_offset_0 <= mv.offset-current-0
net current_offset_0 => gladevcp8.x-offset-current

net current_offset_1 <= mv.offset-current-1
net current_offset_1 => gladevcp8.y-offset-current

net current_offset_2 <= mv.offset-current-2
net current_offset_2 => gladevcp8.z-offset-current