[MAX]
# distance from the end of the "reference tool" (tool-length - 0) to the
# center of the head tilt axis
B_PIVOT_LENGTH = 0


[DISPLAY]
DISPLAY           = axis
CYCLE_TIME        = 0.200
POSITION_OFFSET   = RELATIVE
POSITION_FEEDBACK = ACTUAL
MAX_FEED_OVERRIDE = 2.0
PROGRAM_PREFIX    = ../../nc_files/
INTRO_GRAPHIC     = linuxcnc.gif
INTRO_TIME        = 5
EDITOR            = gedit

[RS274NGC]
PARAMETER_FILE = max5triv.var

[EMCMOT]
EMCMOT       = motmod
COMM_TIMEOUT = 1.0
SERVO_PERIOD = 1000000

[TASK]
TASK = milltask
CYCLE_TIME = 0.010

[TRAJ]
COORDINATES = X Y Z B C
LINEAR_UNITS = 1.0
ANGULAR_UNITS = 1.0
DEFAULT_LINEAR_VELOCITY = 200.0
MAX_LINEAR_VELOCITY = 346.0
MAX_LINEAR_ACCELERATION = 800.0
DEFAULT_LINEAR_ACCELERATION = 800.0

[EMCIO]
EMCIO      = io
CYCLE_TIME = 0.100
TOOL_TABLE = max5.tbl

[AXIS_X]
MIN_LIMIT = -100
MAX_LIMIT = 200
MAX_VELOCITY = 20.0
MAX_ACCELERATION = 100.0

[JOINT_0]
# this is the table
TYPE = LINEAR
HOME = 0.000
MAX_VELOCITY = 20.0
MAX_ACCELERATION = 100.0
MIN_LIMIT = -100
MAX_LIMIT = 200
HOME_OFFSET = 101.0
HOME_SEARCH_VEL = 20.0
HOME_LATCH_VEL = 5.0
HOME_IGNORE_LIMITS = YES
HOME_SEQUENCE = 1

[AXIS_Y]
MIN_LIMIT = -60
MAX_LIMIT = 60
MAX_VELOCITY = 20.0
MAX_ACCELERATION = 100.0

[JOINT_1]
# this is the saddle
TYPE = LINEAR
HOME = 0.000
MAX_VELOCITY = 20.0
MAX_ACCELERATION = 100.0
MIN_LIMIT = -60
MAX_LIMIT = 60
HOME_OFFSET = -61
HOME_SEARCH_VEL = -20
HOME_LATCH_VEL = -3
HOME_IGNORE_LIMITS = YES
HOME_SEQUENCE = 1

[AXIS_Z]
MIN_LIMIT = -149.0
MAX_LIMIT = 1.0
MAX_VELOCITY = 20.0
MAX_ACCELERATION = 100.0

[JOINT_2]
# this is the head moving up and down the column
TYPE = LINEAR
HOME = 0.000
MAX_VELOCITY = 20.0
MAX_ACCELERATION = 100.0
MIN_LIMIT = -149.0
MAX_LIMIT = 1.0
HOME_OFFSET = 2.0
HOME_SEARCH_VEL = 20.0
HOME_LATCH_VEL = 5.0
HOME_IGNORE_LIMITS = YES
HOME_SEQUENCE = 0

[AXIS_A]
MIN_LIMIT = -10.0
MAX_LIMIT = 10.0
MAX_VELOCITY = 45.0
MAX_ACCELERATION = 100.0

[JOINT_3]
TYPE = ANGULAR
HOME = 0.000
MAX_VELOCITY = 45.0
MAX_ACCELERATION = 100.0
MIN_LIMIT = -10.0
MAX_LIMIT = 10.0
HOME_OFFSET = 0.0
HOME_SEARCH_VEL = 0.0
HOME_LATCH_VEL = 0.0
HOME_IGNORE_LIMITS = NO
HOME_SEQUENCE = 0

[AXIS_B]
MIN_LIMIT = -90.0
MAX_LIMIT = 90.0
MAX_VELOCITY = 45.0
MAX_ACCELERATION = 225.0

[JOINT_4]
# this is the head tilting side to side
TYPE = ANGULAR
HOME = 0.000
MAX_VELOCITY = 45.0
MAX_ACCELERATION = 225.0
MIN_LIMIT = -90.0
MAX_LIMIT = 90.0
HOME_OFFSET = 91.0
HOME_SEARCH_VEL = 25.0
HOME_LATCH_VEL = 3.0
HOME_IGNORE_LIMITS = YES
HOME_SEQUENCE = 1

[AXIS_C]
MIN_LIMIT = -3600.0
MAX_LIMIT = 3600.0
MAX_VELOCITY = 45.0
MAX_ACCELERATION = 225.0

[JOINT_5]
# this is a rotary table sitting on the main table
TYPE = ANGULAR
HOME = 0.000
MAX_VELOCITY = 45.0
MAX_ACCELERATION = 225.0
MIN_LIMIT = -3600.0
MAX_LIMIT = 3600.0
HOME_OFFSET = 0.0
HOME_SEARCH_VEL = 20.0
HOME_LATCH_VEL = 3.0
HOME_IGNORE_LIMITS = NO
HOME_SEQUENCE = 1