# These values should be edited to represent the machine geometry

# Base joints positions in base (world) coordinates
setp genhexkins.base.0.x -22.950
setp genhexkins.base.0.y  13.250
setp genhexkins.base.0.z   0.000

setp genhexkins.base.1.x  22.950
setp genhexkins.base.1.y  13.250
setp genhexkins.base.1.z   0.000

setp genhexkins.base.2.x  22.950
setp genhexkins.base.2.y  13.250
setp genhexkins.base.2.z   0.000

setp genhexkins.base.3.x   0.000
setp genhexkins.base.3.y -26.500
setp genhexkins.base.3.z   0.000

setp genhexkins.base.4.x   0.000
setp genhexkins.base.4.y -26.500
setp genhexkins.base.4.z   0.000

setp genhexkins.base.5.x -22.950
setp genhexkins.base.5.y  13.250
setp genhexkins.base.5.z   0.000

# Platform joints positions in platform coordinates
setp genhexkins.platform.0.x  -1.000
setp genhexkins.platform.0.y  11.500
setp genhexkins.platform.0.z   0.000

setp genhexkins.platform.1.x   1.000
setp genhexkins.platform.1.y  11.500
setp genhexkins.platform.1.z   0.000

setp genhexkins.platform.2.x  10.459
setp genhexkins.platform.2.y  -4.884
setp genhexkins.platform.2.z   0.000

setp genhexkins.platform.3.x   9.459
setp genhexkins.platform.3.y  -6.616
setp genhexkins.platform.3.z   0.000

setp genhexkins.platform.4.x  -9.459
setp genhexkins.platform.4.y  -6.616
setp genhexkins.platform.4.z   0.000

setp genhexkins.platform.5.x -10.459
setp genhexkins.platform.5.y  -4.884
setp genhexkins.platform.5.z   0.000

# Connect tool offset pin to motion
net tool-offset genhexkins.tool-offset motion.tooloffset.z

# Forward kinematics iterations control, uncomment to use
# Normally not nesessary, use only if you know what you're doing

# Minimum error value that ends iterations with found solution
# setp genhexkins.convergence-criterion 1e-9

# Limit of iterations, if exceeded iterations stop with no convergence
# setp genhexkins.limit-iterations 120

# Maximum error value, if exceeded iterations stop with no convergence
# setp genhexkins.max-error 100.0