; MACROCOMMAND=Face Diameter,SFM,DOC,FPR,Z Length,Angle,Tool Number, Max RPM
; MACRODEFAULTS=1,500,.02,.007,-2,0,1,1500
; MACROSVG=LatheMacro.svg,2,10

; O<facing>call [${face.x-f}] [${face.sf-f}] [${face.cut-f}] [${face.feed-f}] [${face.z-f}] [${face.angle-s}] [${face.tool-s}] 

; #1 face diameter
; #2 surface speed
; #3 DOC
; #4 feed/rpm
; #5 Face Z length
; #6 face angle
; #7 tool numbber
; #8 max RPM
;Facing

O<facing> sub

O10 IF [#6 NE 0]
   (MSG, Angled facing isn't supported yet)
    M2
O10 ENDIF

O107 IF [#<_imperial>]
    (MSG, IMPERIAL ON)
    #1 = [#1 * 25.4]
    #2 = [#2 * 304.8] ; sf/m to mm/m
    #3 = [#3 * 25.4]
    #4 = [#4 * 25.4]
    #5 = [#5 * 25.4]
O107  ENDIF

M73

G7 ; Lathe Diameter Mode
G18 ; XZ Plane
G21 ; Metric Units
G90 ; Absolute Distance


#14 = [#<_x> * 2] (starting X)
#13 = #<_z> (starting Z)

(debug, Facing start X #14 mm, Start Z #13 mm)
(debug, Finish Z #5 mm)
(MSG, Unpause To start Facing Macro)
m0

M6 T#7 G43

G96 D#8 S#2 ; Constant Surface Speed Mode
M3
g95 F#4 ; Feed-Per-Rev Mode

g4p1 ; Wait to reach speed

	O200 WHILE [#13 GT #5 + #3]
	
	#13=[#13-#3]
	G1 Z#13
	G1 X#1
	G0 Z[#13+#3]
	G0 X#14
	G0 Z#13
	O200 ENDWHILE
	
	G1 Z#5
	G1 X#1
	G0 Z[#13+#3]
	G0 X[#14+#3]
	G0 Z#5 ; For touch-off
    M5
O<facing> endsub
M2